Table of Contents
Advertisement
TCP
Port
UDP
Port
Port Id
Current List
Non-IPv4 ACL
In ※Packet Type / Binding box should select ※Non-IPv4
Object
Group ID
Action
VLAN
Packet Type
Ether Type
Type
Current List
Set this field if Packet Type is IPv4, else ignore.
Any / FTP(21) / HTTP(80)
Set this field if Packet Type is IPv4, else ignore.
0~65535
If TCP port not find in TCP field, you can direct assign number.
Set this field if Packet Type is IPv4, else ignore.
Any / DHCP(67) / TFTP(69) / NetBios(137)
Set this field if Packet Type is IPv4, else ignore.
0~65535
If UDP port not find in UDP field, you can direct assign number.
Source port id, from 1~10, 0 means don't care.
You create ACL and Binding groups.
Description
1 ~ 200
Permit / Deny.
Permit: Permit packet cross switch.
Deny: Drop packet.
Any / VID.
Any: Any VLAN ID.
VID: 1~4094. A certain VLAN ID.
IPv4 / Non-IPv4 / Binding
IPv4: Set Ipv4 packet field.
Non-IPv4: Set non-Ipv4 packet field.
Binding: Set binding entry.
Set this field if Packet Type is Non-IPv4, else ignore.)
Any / ARP(0x0806) / IPX(0x8137)
Set this field if Packet Type is Non-IPv4, else ignore.)
0~0xFFFF
If ether type not find in Ether Type field, you can direct assign
number.
You create ACL and Binding groups.
117
User's Manual of WGSW-2620HP
Any
Any
0
Default Vaule
Permit
Any
IPv4
Any
Advertisement
Table of Contents
