Power Over Ethernet Commands; Display System Poe Status - Planet WGSW-2620HP User Manual

24-port 10/100mbps + 2 gigabit tp/sfp managed 02.3at poe switch
Hide thumbs Also See for WGSW-2620HP:
Table of Contents

Advertisement

6.18 Power over Ethernet Commands

show poe
show poe status
poe temperature-protection
poe limit-mode
poe enable
poe priority
poe maximum-power
WGSW-2620HP PoE power budget is 360W and support 24 ports PoE. This chapter will be
described how to configure PoE feature by example of WGSW-2620HP.

6.18.1 Display System PoE status

show poe
Description:
Show System Power over Ethernet information
Command Level
Global Configuration
Example:
Switch(config)# show poe
Maximum Available Power
POE Admin mode
Temperature Unit1
Temperature Unit2
Over Temperature
PoE Power Consumption
Temperature Threshold
Usage
Usage Threshold
PoE Power limit mode
Show System Power over Ethernet information
Show PoE port information
Enabling or disabling the PoE power supply over temperature protection
Configure System PoE power limit mode information
Enabling or disabling the port POE injects function
Set port priority for the power supply management
*
Enabling or disabling per port power output limit
:360Watts
:Enable
:34C/93F
:37C/98F
:Enable
: 0 Watts
:50
:0%
: 100%
: Consumption
User's Manual of WGSW-2620HP
189

Advertisement

Table of Contents
loading

Table of Contents