Led Indications - Planet WGSW-2620HP User Manual

■ Reset button
At the left of front panel, the reset button is designed for reboot the Managed Switch without turn off and on the power.
The following is the summary table of Reset button
Reset Button Pressed and Released
About 5 seconds
About 10 seconds

2.1.2 LED Indications

The front panel LEDs indicates instant status of port links, data activity and system power; helps monitor and troubleshoot
when needed.
WGSW-2620HP LED indication
System
LED Color
PWR Green
SYS Green
Alert
LED Color
PWR Alert Green
FAN1 Green
FAN2 Green
FAN3 Green
functions:
Function
Reboot the Managed Switch.
Reset the Managed Switch to Factory Default configuration.
The Managed Switch will then reboot and load the default
settings as below:
。
。
。
。
Figure 2-2: WGSW-2620HP LED Panel
Lights to indicate that the Switch has power.
Lights to indicate the system is working.
Lights to indicate that the PoE power supply failure.
Lights to indicate that the FAN1 failure.
Lights to indicate that the FAN2 failure.
Lights to indicate that the FAN3 failure.
User's Manual of WGSW-2620HP
Default Password: admin
Default IP address: 192.168.0.100
Subnet mask: 255.255.255.0
Default Gateway: 192.168.0.254
Function
Function
17