Table of Contents
Advertisement
The page includes the following fields:
Object
QinQ
QinQ TPID
Port QinQ
QinQ Uplink
Description
Sets the Managed Switch to QinQ mode, and allows the QinQ tunnel port to
Enable:
be configured.
The Managed Switch operates in its normal VLAN mode.
Disable:
The default is for the Managed Switch to function in Disable mode.
The Tag Protocol Identifier (TPID) specifies the ethertype of incoming packets on a
tunnel access port.
• 802.1Q Tag: 8100
• vMAN Tag: 88A8
Default: 802.1Q Tag.
Check: Sets the Port to QinQ mode. Or the port operates in its normal VLAN mode.
Default: Un-check.
Configures IEEE 802.1Q tunneling (QinQ) for an uplink port to another device
Check:
within the service provider network.
Configures IEEE 802.1Q tunneling (QinQ) for a client access port to segregate
Cancel:
and preserve customer VLAN IDs for traffic crossing the service provider
network.
User's Manual of WGSW-2620HP
83
Advertisement
Table of Contents
