Table of Contents
Advertisement
4.2.4.8 SNMP V3 usm-user
Configure SNMPv3 users table on this page. The entry index keys are Engine ID and User Name. The SNMPv3 Users
Configuration screen in
Figure 4-2-12
The page includes the following fields:
Object
SNMP User Name:
Auth Type:
Auth Key(8~32):
Private Key(8~32):
Remove
appears.
Figure 4-2-12: SNMP Configuration Interface Screenshot
Description
A string identifying the user name that this entry should belong to. The allowed
string length is 1 to 15.
Indicates the authentication protocol that this entry should belong to. Possible
authentication protocol are:
•
None: None authentication protocol.
•
MD5: An optional flag to indicate that this user using MD5 authentication
protocol.
The value of security level cannot be modified if entry already exist. That means
must first ensure that the value is set correctly.
A string identifying the authentication pass phrase.
For MD5 authentication protocol, the allowed string length is 8 to 32.
A string identifying the privacy pass phrase.
The allowed string length is 8 to 32.
Check to delete the selected entry. It will be deleted during the next save.
User's Manual of WGSW-2620HP
49
Advertisement
Table of Contents
