Pressure Test - Kane KANE455 Manual

4.2 PRESSURE TEST

Select "Prs". The pump stops automatically. Press
the pressure sensor. Using the black connectors and manometer hose, connect to
P1 for single pressure or P1 and P2 for differential pressure.
PRS display
PRESSURE
P 0.01
mbar
14:56:29
Press /
Bluetooth fitted).
Hold /
Viewing / printing a logged pressure test
Select MENU / REPORT / PRESSURE / VIEW
Use or to select the log number to be printed.
Press /
WARNING
Before using the KANE455 to measure the pressure of a gas/air ratio valve, read
the boiler manufacturer's instructions thoroughly. If in doubt contact the boiler
manufacturer.
After adjusting a gas/air ratio valve it is essential that the CO, CO2 and CO/CO2
ratio readings are within the boiler manufacturer's specified limits.
Supplied By www.heating spares.co Tel. 0161 620 6677
Defaults to smoothing off on start-up. Can
→
be changed via "Menu".
Defaults to low resolution on start-up. Can
→
be changed via "Menu".
Defaults to mBar on start-up. Can be
→
changed via "Menu".
Displays time to enable manually timed
→
test.
to print a full combustion test (also sends to PC if
for 2+ seconds to log a full combustion report.
to print the test (also sends to PC if Bluetooth fitted).
KANE455 manual
/ to auto-zero
Page 15