System Requirements - Peak PCAN-USB Pro FD User Manual

LIN
Bit rates from 1 kbit/s up to 20 kbit/s
■
TJA1028 LIN transceiver
■
Compliant with all LIN specifications (up to version 2.2)
■
Both LIN channels (common ground) are opto-decoupled against USB and CAN
■
FD
Can be used as a LIN master or slave (1 ms master task resolution)
■
Automatic bit rate, frame length, and checksum type recognition
■
Autonomous scheduler with support for unconditional, event, and sporadic
■
frames
Hardware can work through a schedule table (up to 8 schedule tables can be
■
configured with a total of 256 slots)

1.2 System Requirements

Computer with:
Operating system Windows 11 (x64/ARM64), 10 (x64), or Linux
■
a vacant USB port (USB 1.1, USB 2.0, or USB 3.0) or
■
a vacant USB port at a self-powered USB hub
■
LIN
Per channel a supply voltage between 8 and 18 V for the LIN transceiver
1 Introduction PCAN-USB Pro FD
User Manual 2.0.0 © 2023 PEAK-System Technik GmbH
7