Configuration - Peak PCAN-USB Pro FD User Manual

2

Configuration

The following describes the configuration for the power supply of external devices
and the internal termination. If you do not need any of these options, skip this
chapter.
The interface must be opened for the configuration.
Risk of short circuit! Soldering on the interface may only be
performed by qualified electrical engineering personnel.
Attention! Electrostatic discharge (ESD) can damage or destroy
components on the card. Take precautions to avoid ESD.
2 Configuration PCAN-USB Pro FD
User Manual 2.0.0 © 2023 PEAK-System Technik GmbH
9