Can Cabling - Peak PCAN-USB Pro FD User Manual

Pin Assignment
1 CAN_V+ (external, optional)
2 CAN_Low
3 CAN_GND
4 LIN
5 LIN_GND
6 LIN_GND
7 CAN_High
8 Not assigned
9 LIN_V
Bat
PEAK System offers a pre-configured LIN connection cable
(IPEK-003013), wich allows the tapping of individual lines. The LIN and
the supply lines are lead directly out to separate plugs and the CAN
lines are forwarded to a D-Sub plug.

3.5 CAN Cabling

3.5.1 Termination
The High-speed CAN bus (ISO 11898-2) must be terminated with 120 Ω on both
ends. The termination prevents interfering signal reflections and ensures the
proper operation of the transceivers of the connected CAN nodes (CAN interfaces,
control devices).
3.5.2 Example of a Connection
3 Installation PCAN-USB Pro FD
User Manual 2.0.0 © 2023 PEAK-System Technik GmbH
D-Sub socket
17