PCAN-USB (ISO) – User Manual
CAN connection 9-pin Sub-D male, pin assignment according to
CiA recommendation DS102
Galvanic isolation at CAN connection up to 500 V (PCAN-USB
ISO only)
Support for operating systems Windows (98 SE, ME, 2000 SP4,
XP) and Linux
Note: This manual describes the use of PCAN-USB-Adapters
with Windows. You can find device drivers for Linux and the
corresponding information on PEAK-System's website under
http://www.peak-system.com/linux.
1.2
System Requirements
The following prerequisites must be given, so that the PCAN-USB-
Adapter can be used properly:
A free USB port (USB 1.1 or USB 2.0) at the PC or at an USB hub
connected to the PC
Operating system Windows (98 SE, ME, 2000 SP4, XP) or Linux
1.3
Scope of Supply
The scope of supply normally consists of the following parts:
Adapter PCAN-USB (plastic case with CAN connector and a
cable for USB connection)
CD-ROM with software (drivers, utilities), programming
examples, and documentation
5