Technical Data - Peak PCAN-USB Pro FD User Manual

9

Technical Data

USB
USB mode
USB connector
CAN
Protocols
Physical transmission
CAN connector
CAN bit rates
CAN FD bit rates
Controller
Transceiver
Time stamp resolution
Galvanic isolation
Power supply external devices
Internal Termination
LIN
Transceiver power supply
LIN specification
LIN connector
Transceiver
Bit rates
Time stamp resolution
Master task resolution
Scheduler
Galvanic isolation
9 Technical Data PCAN-USB Pro FD
User Manual 2.0.0 © 2023 PEAK-System Technik GmbH
High-speed USB 2.0, compatible with USB 1.1 and USB 3.0
Plug type A
CAN and CAN FD according to ISO 11898-1; non-ISO CAN FD
ISO 11898-2 (High-speed CAN)
D-Sub (m), 9 pins
Nominal: 25 kbit/s to 1 Mbit/s
Nominal: 25 kbit/s to 1 Mbit/s
Data: 25 kbit/s to 12 Mbit/s
FPGA implementation
TJA1044GT
1 µs
up to 500 V per CAN connection against USB and LIN
D-Sub pin 1; 5 V, max. 50 mA, disabled at delivery
via solder bridges, disabled at delivery
8 to 18 V DC via D-Sub connector
2.2, downward-compatible
D-Sub, 9 pins
TJA1028 (TJA1021/20 up to S/N 24547)
1 to 20 kbit/s
1 µs
1 ms
Initiated by software, processing by hardware
8 schedule tables with a total of 256 slots configurable
up to 500 V against USB and CAN, no isolation between LIN channels
45