Appendix D Quick Reference - Peak PCAN-USB Pro FD User Manual

Appendix D Quick Reference
Software/Hardware Installation under Windows
Download the device drivers installation package from our website
www.peak-system.com/quick/DL-Driver-E. Install the driver before you connect the
interface.
After driver installation connect the interface to a USB port of the computer. The
new hardware is recognized by Windows and the driver is initialized. The LED
„USB" on the interface then lights up green.
Check the operational readiness. Open the Windows Start menu. Type Peak
Settings and press |Enter|. The window PEAK Settings appears. The connected
CAN interface is displayed under CAN Hardware. The connected LIN interface is
displayed under LIN Hardware.
Getting Started under Windows
Run the CAN monitor PCAN-View from the Windows Start menu as a sample
application for accessing the CAN interface. For initialization of the CAN interface
select the desired CAN channel and CAN bit rate.
Run the LIN monitor PLIN-View Pro from the Windows Start menu as a sample
application for accessing the LIN interface. For initialization of the LIN interface
select the desired LIN channel, the mode, and LIN bit rate.

Appendix D Quick Reference

PCAN-USB Pro FD
50
User Manual 2.0.0 © 2023 PEAK-System Technik GmbH