Unplugging The Usb Connection; Distinguishing Several Interfaces - Peak PCAN-USB Pro FD User Manual

4.2 Unplugging the USB Connection

The interface can be disconnected from the computer without further actions. In
Windows, the interface is not listed under "Safely Remove Hardware".

4.3 Distinguishing several interfaces

You can operate several interfaces on a single computer at the same time. For this
purpose, the device ID for CAN and the hardware ID for LIN can be determined in
order to distinguish the interfaces in a software environment. The ID's are
permanently stored in the interface.
PCAN-View / PLIN-View Pro
To set the device ID in PCAN-View or PLIN-View Pro:
1. Open the tab PCAN-USB Pro FD of the respective program.
2. Enter a hexadecimal number with suffix "h" as the new hardware ID.
3. Confirm the entry with Set.
PEAK-Settings
To set the device ID in PEAK-Settings:
1. Click on CAN Hardware or LIN Hardware.
The connected hardware is displayed.
2. Enter a hexadecimal number with suffix "h" as the new hardware ID.
3. Confirm the entry with Set.
4 Operation PCAN-USB Pro FD
User Manual 2.0.0 © 2023 PEAK-System Technik GmbH
20