Table of Contents
Advertisement
113
Conditions
Feature References
4-46
System Programming
4.3
VM Status DTMF Set
3.
Enter a DTMF signal number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new number.
4.
Press STORE.
5.
To program another selection, keep pressing NEXT or PREV
until the desired selection is displayed.
6.
Repeat steps 3 through 5.
7.
Press END.
• A DTMF signal number can have a maximum of three digits, consisting
of 0 through 9,
• The DTMF signals are sent to the extensions in the extension group that
is assigned as "VM" or "AA" in program [106] "Station Hunting
Type."
Section 3, Features,
Voice Mail Integration
System Programming
(contd.)
, # and PAUSE.
Advertisement
Table of Contents
