Did Table Number Assignment - Panasonic KX-TD816AL Installation Manual

430
Description
Selection
Default
Programming
Conditions
Feature References
4-102 System Programming
4.6

DID Table Number Assignment

Assigns DID table number to each CO line group.
• CO line group (TRG) number: 1 through 8,
• DID table number: 1 through 4
All CO line groups – Not stored
1. Enter 430.
Display: DID Table NO.
2. Press NEXT.
Display: TRK GRP NO?–>
3. Enter a CO line group number.
To enter CO line group number 1, you can also press NEXT.
Display example: TRG1:Not Stored
4. Enter a DID table number.
To change the current entry, press CLEAR and the new number.
5. Press STORE.
6. To program another CO line group, press NEXT or PREV, or
SELECT and the desired CO line group number.
7. Repeat steps 4 through 6.
8. Press END.
This is the first and the basic programming for the DID feature. If the
assignment is changed here, it affects the other programmings ([431]
through [435]).
Section 3, Features,
Direct Inward Dialing (DID)
CO Line Programming
( =all CO line groups)