Table of Contents
Advertisement
200
Description
Selection
Default
Programming
Conditions
Feature References
4-56
System Programming
4.4
Hold Recall Time
Assigns the length of the hold recall timer. This timer is used to
alert an extension that a call has been held for an extended period
of time.
Time (seconds): 0 through 240 (0=Hold Recall disabled)
60 s
1.
Enter 200.
Display: Hold Recall Time
2.
Press NEXT.
Display example: Time: 60
3.
Enter the time.
To change the current entry, press CLEAR and the new time.
4.
Press STORE.
5.
Press END.
• Select "0" if Hold Recall is not required.
• You cannot leave the entry empty.
Section 3, Features,
Hold Recall
Timer Programming
sec
Advertisement
Table of Contents
