Table of Contents
Advertisement
5
Recovery
Hard Drive Recovery Process - Kontron PC
The Agilent Recovery System can be used to repair errors on the
computer's C: drive partition, or to restore the original factory
configuration of the system software. The Agilent Recovery System is
stored in a separate hidden hard disk drive partition.
Repairing errors on the hard disk drive may result in loss of data or files.
If you need more information about the Windows "chkdsk" error repair
process, see the chkdsk documentation in the Microsoft Windows XP Help
and Support Center.
Restoring the original factory system software does not restore any of the
following items:
• Windows system configurations that were made after the computer was
• Additional software that was installed after the computer was shipped
• Any data or programs saved on the D: or E: drives.
• Any upgrades that were made to the Agilent measurement application
It is recommended that you use a regular back up strategy. Your IT department may already
N O T E
have a back up strategy in place which is suitable for the computer and its data. Using the
Agilent Recovery System in conjunction with a regular back up strategy should allow you to
fully recover the computer software and data.
66
shipped from the factory. For example, Windows and Service Pack
updates, user accounts, and windows configuration settings. After an
Agilent Recovery, these configurations need to be redone.
from the factory. After an Agilent Recovery, that software needs to be
re- installed.
software.
E5505A Installation Guide
Advertisement
Table of Contents
