Agilent Technologies N5502A Installation Manual page 61

Phase noise measurement system
Table of Contents

Advertisement

5
Recovery
Create a recovery DVD
Step
15 Select the following in the "Burn Disc"
16 Click 'Burn'.
17 Select "Exit", then Click 'OK'.
18 Click 'Next'.
19 Select the "Disc" menu, then select "Exit".
20 Click "OK".
21 Close the "Digital Media Center" window by
60
window:
Volume Name: type "Recovery DVD"
Leave all other selections in their default
positions.
selecting the [X] in the upper-right corner of
the window.
Notes
The burn and verification takes
approximately 20 minutes.
"Operation successfully completed.
The written DVD is ejected. Keep this DVD in
a safe place. The DVD will be required if you
replace the hard drive on your PC.
E5505A Installation Guide

Advertisement

Table of Contents
loading

Table of Contents