Arrow Storage Products Mountaineer Series Owner's Manual & Assembly Manual page 30

Roof Install Prep Page
Read thru all of Roof Assembly before beginning Step 10.
IMPORTANT:
Measure the building diagonally again to make sure the building is
square. The building should be square at the base and at the top.
This will make Roof Panels fi t better and holes will better align.
Be sure to carefully follow the Roof Panel
Placement Order Diagram on this page.
Crimped Rib
Whenever a crimped rib and an uncrimped rib meet,
place the crimped rib UNDER the uncrimped rib.
Roof Panel Placement Order
2
8579
6
7743
8
7743
10
7743
4
8578
At this time, take a moment to ensure
the building is level and square.
Uncrimped Rib
The building is square when diagonal measurements are equal.
1
5
7
9
3
FRONT
8578
7743
FASTEN TO ROOF BEAMS WITH SCREWS
7743
7743
FASTEN TO NEXT PANEL WITH BOLT AND NUT
8579
DO NOT FASTEN AT THIS TIME
30
FASTEN TO RIDGE CAP