Arrow Storage Products Mountaineer Series Owner's Manual & Assembly Manual page 28

Step 9: Continued
You will need for this page:
SB
(QTY: 13)
10649
Leave Hole Open
10649
5
Seal the gap between the Gables using the
Weather Stripping Tape as shown.
6 Secure two Front and Rear Roof Beams
together with a single Bolt to form the Main Roof
Beam as shown above. The end of the Main
Roof Beam with the open hole should face the Gable.
7 Position the Front and Rear Roof Beams as
shown below and attach to Gable and Truss
using two Small Bolts and Nuts per side. Install
the Main Beam fi rst.
Beam End Views
Side of Beams with small holes must face up.
4
10649
Roof Beam
10649
Tape should wrap around
gap between Gables.
Weather Stripping Tape
Tape BOTH Gable joints before installing Roof Beams.
28
10649
10649
10'x10' (3,0 m x 3,1 m)
building shown.
Top View of Gables
CUT