Arrow Storage Products Mountaineer Series Owner's Manual & Assembly Manual page 25

Step 8: Continued
You will need for this page:
SS
(QTY: 150+)
10'x10' (3,0 m x 3,1 m)
building shown.
1 Working one side at a time, lift the Panels into
place and secure with three Small Screws in the
top of the Panel, three Small Screws in the middle
of the Panel, and three Small Screws in the bottom of the
Panel. Roll the Panel back as shown on the previous page
and overlap the rib with the rib of the next Panel.
2 Secure the Panels with a Small Bolt and Nut thru
the center hole at the overlap (see below). Next,
fi nish securing the Panels to the building with
Small Screws as shown in the diagram on the previous
page. Note: When attaching to Corner Panels, use Small
Screws.
Place Small Bolt thru center hole where Panels overlap.
SB
(QTY: 9+)
10+
7822
Wall Panel
Panels have been installed.
25
Continue until ALL Wall