Arrow Storage Products Mountaineer Series Owner's Manual & Assembly Manual page 42

Step 13: Continued
You will need for this page:
LS
(QTY: 26)
5
Secure all Diagonal Braces to the Vertical
Door Braces with Large Screws as shown.
Next, position the Cane Bolt Bracket back-
to-back against the Vertical Door Brace closest to
the center of one Door as shown. Slide the Cane
Bolt Bracket to the bottom of the Door and secure
with three Large Screws. Repeat for other Door.
6
Align the Cane Bolt with the holes in the
Cane Bolt Bracket and Vertical Door
Brace and secure with six Large Screws as
shown. Repeat for other Door.
Right Door
2
10675
Cane Bolt
Bracket
Latch Plates shown
for alignment only,
install on page 44.
10675
Inside
2
66780
with thier own hardware. This hardware
is not used when assembling
the building. Instead, use the
Cane Bolt
hardware indicated in each step.
BOTH DOORS
42
The Cane Bolt, Door Handles
and Slide Bolt are pre-packaged
66780
Inside
Left Door
10675
Inside