Arrow Storage Products Mountaineer Series Owner's Manual & Assembly Manual page 23

Step 7: Wall Angles
You will need for this page:
LS SB
(QTY: 4+)
(QTY: 4+)
1
Starting at the front and rear of the building, attach
Side Wall Angles to the front and rear wall of the
building with Large Screws as shown.
All angles overlap by 8 1/4"
(21,0 cm)
Overlap Length
8 1/4"
21,0 cm
10625
LS
(QTY: 4)
10'x10' (3,0 m x 3,1 m)
building shown.
2
Nuts to secure. All Side Wall Angles overlap by 8 1/4" (21,0 cm).
10625
4+
10625
Side Angle
Next, insert Large Screws where the Wall Angles meet
the Trusses. Where the Wall Angles overlap, align the
holes as shown to the left and insert two Small Bolts and
Continue until Side Wall
Angles are installed along
both sides of the building.
23
10625
SB
SB
LS
10625
LS
LS
LS