Table of Contents
Advertisement
[UNIFORMITY]
Correct the brightness unevenness and color unevenness of the whole image.
Setting [GRADIENT CORRECTION]
Correction is performed in vertical and horizontal directions to approach the even condition when unevenness in
one direction is occurring throughout the whole image.
1)
Press as to select [UNIFORMITY].
2)
Press the <ENTER> button.
f The [UNIFORMITY] screen is displayed.
3)
Press as to select [WHITE], [RED], [GREEN], or [BLUE].
4)
Press qw to adjust the level.
Item
[VERTICAL]
[HORIZONTAL]
Setting [FLEXIBLE CORRECTION]
Correct the topical brightness unevenness and color unevenness using the correction value in the projector.
1)
Press as to select [UNIFORMITY].
2)
Press the <ENTER> button.
f The [UNIFORMITY] screen is displayed.
3)
Press as to select [FLEXIBLE CORRECTION].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[GEOMETRY UNLINKED]
[OFF]
[GEOMETRY LINKED]
f Proceed to Step 5) when anything other than [OFF] is selected.
5)
Press as to select [MODE].
6)
Press qw to switch the item.
f The items will switch each time you press the button.
[CHROMA ONLY]
[LUMINANCE/CHROMA]
146 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Operation
Press w.
Press q.
Press w.
Press q.
Corrects the brightness unevenness and color unevenness using the correction value in the projector.
The shape of the projected image and the compensation area of uniformity are not linked.
Select this item to correct the brightness unevenness and the color unevenness of the light irradiated
from the projection lens.
Does not perform correction using the correction value in the projector. Select this item to prioritize
the brightness of the whole projected image.
Corrects the brightness unevenness and color unevenness using the correction value in the
projector. When the geometric adjustment is performed, the shape of the projected image and the
compensation area of uniformity are linked.
Select this item when projecting at an angle against the flat screen, or when projecting on a curved
screen.
Corrects only the color unevenness. Select this item to prioritize the brightness of the whole projected
image.
Corrects the brightness unevenness and the color unevenness.
Adjustment
The lower-side color becomes
pale, or the upper-side color
becomes dark.
The upper-side color becomes
pale, or the lower-side color
becomes dark.
The left-side color becomes pale,
or the right-side color becomes
dark.
The right-side color becomes
pale, or the left-side color
becomes dark.
Range of adjustment
-127 - +127
Advertisement
Table of Contents
