RGBlink Q16pro Gen2 1U User Manual page 38

2. Layer Scale and Crop
Choose one layer needed to be adjusted, and type in its
position and size.
means data related, when width is changed, height
will be changed as same proportion.
means data not related, width and height need to be
filled respectively.
Quick
Quick is to set layer layout quickly.
1. Single Monitor: choose one output port users need to
set
2. Single Board: choose one output module users need to
set
3. All Monitors: set close or on
4. Layer Set: set layer layout
Users can drag and drop the source from the Signal List.
After setting, click <Set> to confirm and the layout will be
shown in the interface as shown in the right figure.
Q16pro Gen2 1U User Manual 37