RGBlink Q16pro Gen2 1U User Manual page 37

IPC
IPC is short for IP Camera, that is, the signal of IP
camera accessed through IP input module are
displayed here.
Signal
Signal list, showing all input signals and resolutions
currently. Drag the signal to the display.
Click , users can rename the input signal and then
click to confirm.
Layer
Layer number: The number in the red rectangle on
the right figure represents the number of layers that
can be placed at the output.
As signal source is dragged to the display, the
number in the red rectangle reduces accordingly, and
if layers have all been used up, the signal source
cannot be dragged to this display anymore.
Note：One signal occupies one layer (4K signal occupies four layers), signal can be dragged into the
container repeatedly.
Layer Adjustment：
There are two ways to adjust layer.
1. Use the bar under the interface
Choose one layer and the bar shows its signal source,
type in position and size. Click Set to confirm.
Q16pro Gen2 1U User Manual 36