RGBlink Q16pro Gen2 1U User Manual page 31

OSD:
Q16pro Gen2 1U output modules which support
OSD are shown below: (Please Turn ON Status
before setting)
●Quad HDMI 1.3 Output Module
●Quad SDI Output Module (preliminary)
●Quad DVI Output Module
Order Codes please refer to 4.2 Chapter.
Output Port: current output port
Status: ON/OFF OSD
X/Y: the starting horizontal and vertical position
Width/Height: the horizontal and vertical size of the
text
Font: font of the text, all fonts installed in the
computer are available
Font Type: Normal,Italic,Bold,Bold Italic
Font Size: 0-300 pixels
Alignment: set alignment type
Background: choose transparent background or set
background color
Scroll Speed: 0-16
Scroll Direction: Scroll Off, Scroll Left
Input Text: The exact content of the text
After setting, users choose Save OSD, Clear OSD
(If the setting is not desired) or Close All OSD.
After all settings done, click <Set> and the OSD will
be displayed on the screen.
Input Setting
Click any input port, the board where the port
locates is selected. Users can do settings to the
port now.
A red rectangle flashes around the chosen port
when it is clicked.
User can set <Property> and <EDID>.
Q16pro Gen2 1U User Manual 30