RGBlink Q16pro Gen2 1U User Manual page 14

Custom
-＞ 3840x2160@60
Changing resolution
clean scene layout !
The 0~9 numeric keys will light up at the same time. Use the numeric keys to input the width, height and frame
rate.
After entering the width, press the knob to confirm and then enter the height; if height parameter is set, press the
knob to enter the frame rate, as shown in the figures below.
Custom
-＞ 1024x
Changing resolution
clean scene layout !
Enter width
After the width, height and frame rate are all set, push knob to confirm.
Image Layout
Select the image layout for presentation mode. There are 15 layout patterns built-in as follows：
Push the knob to select layout, and the LCD Panel will automatically return to the previous menu interface. Users
can use the L1-L8 buttons on the front panel to select the layer, and then select the input signal by using IN1- IN8
buttons.
Note: ONLY the first four layouts are available for
Q16pro Gen2 1U
Custom
* Enter value
Changing resolution
clean scene layout !
Custom
-＞ 1024x768@
Changing resolution
clean scene layout !
Enter height
4K input module. Please reselect if the wrong layout is chosen.
User Manual
Custom
-＞ 1024x768@60
Changing resolution
clean scene layout !
Enter frame rate
13