Table of Contents
Advertisement
Bellfi res
5
DISMANTLING / ASSEMBLING OF THE GLASS, REGULATOR
AND BURNER
5.1
DISMANTLING
1
Close the gas supply tap.
2
Unscrew with several turns the 2 screws (to fi x the door) left and right below.
3
Remove the door by lifting it and pulling it forwards out.
Use working gloves when
removing the door !
4
Remove the log set and the embers, or the marble shingles.
5
Carefully remove the grate (around the burner). Avoid damaging the walls!
6
Dismantling pilot light: Dismantling pilot light: Unscrew the 2 screws next to the pilot
light. Remove the wind guard. You can now dismantle the complete "oxy-stop"
pilot light in the front.
7
Dismantling the main burner: Unscrew the 2 bolts (Left and Right) from the main
burner. Loosen the compression fi tting with the mainburner pipe. You can now
remove the main burner.
8
All components are now available and removable.
5.2
ASSEMBLY
Assemble in the reverse order.
Ensure that the sealing cord from the glass plate mate correctly.
Re-check all re-fi tted gas connections for leaks using soapy water or a leak tester.
42
English
Installation instructions
Advertisement
Table of Contents
