Table of Contents
Advertisement
Bellfi res
9
Positioning the grate:
Position the grate around the burner.
10
Positioning the ceramic log set or marble shingles:
The appliance can be supplied with:
• Ceramic log set + embers
• Marble shingles white (small, white marble stones)
• Marble shingles grey (small, grey marble stones)
Important:
Remove the glass according to the instructions in chapter 5; DISMANTLING /
ASSEMBLING OF THE GLASS, THE REGULATOR AND BURNER.
Installation instructions
•
Carefully place the chips of wood/embers/log set
or marble shingles, on and around the main burner
according to the directions in this chapter.
•
Do not place any chips of wood/embers/log set or
marble shingles against the pilot light burner.
Make sure that the pilot fl ame can burn at all times
freely over the main burner. Only in this way is
proper ignition of the main burner ensured.
Ignoring these directions could lead to a
dangerous situation.
•
Make sure that all burner orifi ces remains free
at all times!
•
The burner bed (with chips of wood/embers) and
the positioning of the logs or marble shingles must
not be changed.
•
Only use those items supplied! These been rigorously
checked and the quantities adapted to the appliance.
•
Replacement parts, including the ceramic mat are
available from your dealer.
•
Fitting may only be carried out by a qualifi ed person.
English
29
Advertisement
Table of Contents
