Table of Contents
Advertisement
Bellfi res
6
Assembling the fl ue gas outlet connection:
Push the plate with the fl ue gas outlet connection back upwards and secure.
Then assemble the draft diverter and baffl e plate. Check all connections connect
properly and check for tightness !
7
Gas and electricity connection:
Using a compression fi tting you can connect the gas to the appliance. Beware that
during connection there is no power supply to the gas regulating block and pipes.
The power supply can now be reconnected to the wall socket. (Only applicable if
the appliance is equipped with an ambient lighting and/or a AC power adaptor.)
Prevent the power cord touches the side of the unit. This is due to the high
temperatures of the appliance. Keep this in mind when making the connection to
the wall socket.
8
Check for gas-tightness and appliance functioning:
After assembly check all gas (compression) connections for gas-tightness using
soapy water or a gas leak detector. Also leave the appliance to burn for a while
(maximum 1 minute !) before proceeding. Please consult the instructions for use,
supplied separately with the appliance.
28
English
Installation instructions
Advertisement
Table of Contents
