Dismantling / Assembling Of The Glass, The Regulator And Burner - Bellfires UNICA-2 70 Installation Instructions & Manual For Maintenance

Bellfi res
5 DISMANTLING / ASSEMBLING OF THE GLASS, REGULATOR
AND BURNER
5.1 DISMANTLING
1 Close the gas supply tap.
2 Unscrew with several turns the 2 screws (to fi x the door) left and right below.
3 Remove the door by lifting it and pulling it forwards out.
Use working gloves when
removing the door !
4 Remove the log set and the embers, or the marble shingles.
5 Carefully remove the grate (around the burner). Avoid damaging the walls!
6 Dismantling pilot light: Dismantling pilot light: Unscrew the 2 screws next to the pilot
light. Remove the wind guard. You can now dismantle the complete "oxy-stop"
pilot light in the front.
7 Dismantling the main burner: Unscrew the 2 bolts (Left and Right) from the main
burner. Loosen the compression fi tting with the mainburner pipe. You can now
remove the main burner.
8 All components are now available and removable.
5.2 ASSEMBLY
Assemble in the reverse order.
Ensure that the sealing cord from the glass plate mate correctly.
Re-check all re-fi tted gas connections for leaks using soapy water or a leak tester.
Installation instructions
English
43