Face capture function detects and captures faces in surveillance scenes. When the grading of the
detected face exceeds an algorithm-defined value, the PTZ camera channel captures the face and
triggers linkage actions. Set up rule and parameters before using the function.
Note
For certain device models, you need to select Face Capture on VCA Resource page first.
●
This function is only supported by certain device models.
●
3.1 Set Auto Face Capture Rule
After set the face capture rules and algorithm parameters, the device captures faces and trigger
linkage actions automatically.
Steps
1. Go to Configuration → Face Capture → Rule .
2. Check Enable.
3. Select a configuration mode.
Normal One detection scene is allowed to set. The device captures face in the scene in set
arming schedule.
See Normal Mode Settings for details.
Expert
The device can patrol among the detection scenes and capture face images.
Detection scenes and patrol schedule should be set in advance.
See Expert Mode Settings for details.
4. Click Save.
What to do next
Go to Picture to search and view the captured pictures.
Go to Smart Display to see currently captured face pictures.
3.1.1 Normal Mode Settings
Steps
1. Optional: Click Lock to lock PTZ control to prevent the interruption from other PTZ related action
during configuration.
Normally, the PTZ control is automatically locked when you enter the configuration interface.
You can manually resume the lock when the countdown is over.
2. Use PTZ control panel or click
3. Click
, and draw a detection area on live image.
Network Speed Dome User Manual
Chapter 3 Face Capture
to locate a scene with a face.
8