Huawei UPS5000-E-200K-SM User Manual page 94

UPS5000-E-(200 kVA-300 kVA)
User Manual (50 kVA Power Modules)
Figure 3-19 Installing a SIM card
(1) SIM card installation position
Step 2 Attach the 4G module to the top of the cabinet by the magnet, and connect the
4G module to the USB Host port on the MDU using a USB extension cable.
● Do not install the 4G module in an enclosed environment or a position subject
● The figure uses top cable routing as an example. The installation positions are
Issue 17 (2023-07-10)
NO TICE
to severe signal interference. Otherwise, the 4G module may be disconnected
from the network for a short period of time.
the same for bottom cable routing and top air-flow configuration.
Copyright © Huawei Digital Power Technologies Co., Ltd.
3 Installation
86