Accessories - Vega VEGABAR 86 Operating Instructions Manual

Display and adjustment
module
VEGACONNECT
VEGADIS 82
Overvoltage protection
Protective cover
Flanges
Welded socket, threaded
and hygienic adapter
VEGABAR 86 • 4 ... 20 mA
3.4

Accessories

The instructions for the listed accessories can be found in the down-
load area on our homepage.
The display and adjustment module is used for measured value indi-
cation, adjustment and diagnosis.
The integrated Bluetooth module (optional) enables wireless adjust-
ment via standard adjustment devices.
The interface adapter VEGACONNECT enables the connection of
communication-capable instruments to the USB interface of a PC.
The VEGADIS 82 is suitable for measured value indication of
4 ... 20 mA and 4 ... 20 mA/HART sensors. It is looped into the signal
cable.
The overvoltage arrester B81-35 is used instead of the terminals in
the single or double chamber housing.
The protective cover protects the sensor housing against soiling and
intense heat from solar radiation.
Screwed flanges are available in different versions according to the
following standards: DIN 2501, EN 1092-1, BS 10, ASME B 16.5,
JIS B 2210-1984, GOST 12821-80.
Welded sockets are used to connect the devices to the process.
Threaded and hygienic adapters enable simple adaptation of devices
with standard threaded fittings to process-side hygiene connections.
3 Product description
11