Vega VEGABAR 86 Operating Instructions Manual page 28

6 Set up with the display and adjustment module
Measurement loop name
Application
28
Diagnosis: Information, for example, of device status, peak indicator,
simulation
Additional adjustments: date/time, reset, copy function
Info: Instrument name, hardware and software version, calibration
date, sensor features
Note:
For optimum setting of the measuring point, the individual submenu
items in the main menu item " Setup" should be selected one after
the other and provided with the correct parameters. If possible, go
through the items in the given sequence.
The submenu points are described below.
6.5.1 Setup
In the menu item " Sensor TAG" you edit a twelve-digit measurement
loop designation.
You can enter an unambiguous designation for the sensor, e.g. the
measurement loop name or the tank or product designation. In digital
systems and in the documentation of larger plants, a singular desig-
nation must be entered for exact identification of individual measuring
points.
The available digits include:
•
Letters from A ... Z
•
Numbers from 0 ... 9
•
Special characters +, -, /, -
In this menu item you activate/deactivate the Secondary Device for
electronic differential pressure and select the application.
VEGABAR 86 can be used for process pressure and level measure-
ment. The setting in the delivery status is " Level". The mode can be
changed in this adjustment menu.
If you have connected no Secondary Device, you confirm this with "
Deactivate".
Depending on the selected application, different subchapters in the
following adjustment steps are important. There you can find the
individual adjustment steps.
Enter the requested parameters via the appropriate keys, save your
settings with [OK] and jump to the next menu item with the [ESC] and
the [->] key.
VEGABAR 86 • 4 ... 20 mA