Vega VEGABAR 86 Operating Instructions Manual page 52

11 Supplement
Ʋ Socket seal
Ʋ Seal below wall mounting plate
Ʋ Inspection window housing cover
Ground terminal
Connection cable with IP68 (25 bar) version
Ʋ Cable cover
Ʋ Type label support on cable
Materials, transmitter protection
Transport protective cap, transmitter
ø 22 mm
Transport and mounting protection, trans-
mitter ø 32 mm
Transport and mounting protection, trans-
mitter PVDF
transport protection net
Weights
Basic weight
Suspension cable
Connection tube
Straining clamp
Screw connection for suspension cable
Tensile force
Ʋ Tensile force suspension cable
Torques
Max. torque for process fitting
Ʋ G1½
Max. torque for NPT cable glands and Conduit tubes
Ʋ Plastic housing
Ʋ Aluminium/Stainless steel housing
Input variable
The specifications are only an overview and refer to the measuring cell. Limitations due to the
material and version of the process fitting as well as the selected pressure type are possible. The
specifications on the nameplate apply.
Nominal measuring ranges and overload capability in bar/kPa
Nominal range
Gauge pressure
Only for 316L with 3A approval
4)
Between transmitter and external electronics housing.
5)
Data on overload capability apply for reference temperature.
6)
52
EPDM
EPDM
4)
Polycarbonate (UL-746-C listed)
316Ti/316L
5)
PE, PUR
PE hard
PE
PA
PE
PE
0.7 kg (1.543 lbs)
0.1 kg/m (0.07 lbs/ft)
1.5 kg/m (1 lbs/ft)
0.2 kg (0.441 lbs)
0.4 kg (0.882 lbs)
max. 500 N (112.4045 lbf)
200 Nm (147.5 lbf ft)
10 Nm (7.376 lbf ft)
50 Nm (36.88 lbf ft)
6)
Maximum pressure
Overload capability
Minimum pressure
VEGABAR 86 • 4 ... 20 mA