Accessories - Vega VEGAWELL 52 Operating Instructions Manual

3 Product description
Storage
Storage and transport
temperature
Lifting and carrying
VEGABOX 02
VEGABOX 03
VEGACONNECT
VEGADIS 82
Measuring instrument
holder
Mounting bracket
10
Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
Unless otherwise indicated, the packages must be stored only under
the following conditions:
•
Not in the open
•
Dry and dust free
•
Not exposed to corrosive media
•
Protected against solar radiation
•
Avoiding mechanical shock and vibration
•
Storage and transport temperature see chapter " Supplement -
Technical data - Ambient conditions"
•
Relative moisture 20 ... 85 %
With instrument weights of more than 18 kg (39.68 lbs) suitable and
approved equipment must be used for lifting and carrying.
3.5

Accessories

The VEGABOX 02 is a breather housing for VEGAWELL 52. The
housing contains a filter element for ventilation and optionally a tem-
perature sensor for PT 100.
The VEGABOX 03 is a breather housing for VEGAWELL 52. The
housing contains a filter element for ventilation.
The interface adapter VEGACONNECT enables the connection of
communication-capable instruments to the USB interface of a PC.
The VEGADIS 82 is suitable for measured value indication of
4 ... 20 mA and 4 ... 20 mA/HART sensors. It is looped into the signal
cable.
The measuring instrument holder is used for wall/tube mounting of
VEGABAR series 80 pressure transmitters and VEGAWELL 52 sub-
mersible pressure transmitters. Supplied reducers enable the adapta-
tion to different instrument diameters. The material used is 316L.
The robust, heavy-duty bracket of 1.4301/304 is designed for wall
mounting VEGA instruments. The required fastening elements are
included in the shipment.
VEGAWELL 52 • 4 ... 20 mA/HART Pt 100