Protective cover
Flanges
Welded socket, threaded
and hygienic adapter
VEGABAR 83 • Secondary Device for electronic differential pressure
3.5
Accessories
The instructions for the listed accessories can be found in the down-
load area on our homepage.
The protective cover protects the sensor housing against soiling and
intense heat from solar radiation.
Screwed flanges are available in different versions according to the
following standards: DIN 2501, EN 1092-1, BS 10, ASME B 16.5,
JIS B 2210-1984, GOST 12821-80.
Welded sockets are used to connect the devices to the process.
Threaded and hygienic adapters enable simple adaptation of devices
with standard threaded fittings to process-side hygiene connections.
3 Product description
11