R
M
EMOVAL OF
ERCHANDISER
1. Remove (6) screws from the top, the front,
and the side of the door (as shown).
NOTE: You now have access to the ballast
and light panel.
NOTE: Remember the door switch is used to
reset the refill light.
NOTE: The pumps can not be operated with
the door in the open position.
NOTE: Trying to bypass the door switch dur-
ing the Brixing/Ratio procedure will result in
longer pull down times and improper set-
tings.
© 2004, IMI Cornelius Inc.
MECHANICAL SECTION
- 13 -
Quest Juice Training Manual
1
2
Ballast Assembly
Publication Number: TP00968
3
4
5
6