Section 2. System Description; Product Description; Figure 1. Typical Aquapure And Purelink Installation Example With Options - Jandy APUREM Installation And Operation Manual

Jandy AquaPure /PureLink™ Power Center and Cell Kit
® ®
Section 2. System Description
Options List
1. ORP/External Control Interface
2. ORP/Freeze Control Unit
3. Heater
Heater
Cell with
Flow/Temp/Salinity Sensor
Figure 1. Typical AquaPure and PureLink Installation Example With Options
ATTENTION INSTALLER: Various application notes (including more detailed
instructions) are available from the Dealer covering installation, operation,
maintenance, and plumbing of the chlorinator system.

2.1 Product Description

The AquaPure and PureLink systems use a process known as electrolysis to produce sodium hypochlorite
(liquid chlorine) from a low concentration of salt added to the pool water. Hypochlorite kills bacteria,
oxidizes organic material, and kills algae then reverts back to salt. The system then reuses the salt and the
process starts over again. The systems are comprised of the following components:
AquaPure
• The AquaPure control center converts AC power into low voltage DC current
Control Center
(for stand
• The LCD display on the user interface offers monitoring of chlorine production,
alone systems)
• The control center is connected with the pool circulation pump electrical source so
|
Installation and Operation Manual
ORP Unit
(Control Signal from ORP Unit to
ORP Interface/Aux Board)
Pool Return
which is required by the cell to perform the electrolysis.
cell modes, salinity level, temperature, water flow and diagnostics.
that the electrolytic cell can only operate when the pool pump is on. An optional
pool pump timer can be utilized to help control this function. The flow portion of
the Flow/Temp/Salinity Sensor is a backup device only.
AquaPure®
Control
Center
Pump
Filter
Pool Intake
Spa Intake
Spa Return
Page 7 Page 7
ENGLISH ENGLISH
PureLink
Power Center
OR