Download Print this page

Section 2. General Information; Introduction; Description; General Requirements - Jandy Versa-Plumb CL Series Installation And Operation Manual

Cartridge pool filters
Hide thumbs

Advertisement

Section 2. General Information

2.1 Introduction

This manual contains information for the proper instal-
lation and operation of the Jandy
Cartridge Filters. Procedures in this manual must be
followed exactly. To obtain additional copies of this
manual contact us at 707.776.8200 ext. 237. For address
information see back cover.

2.2 Description

replacement.
line connected to the lower bulkhead (inlet) on the
bottom half of the tank body. It is directed through the
through the upper bulkhead (outlet) on the bottom half
of the tank body. Clean water is returned through the
piping system to the pool.
eventually become so plugged with debris that it will be
with soap and water.
NOTE
but does not sanitize the pool. Pool water must be
sanitized and chemically balanced for clear water.
local health codes. At a minimum, the system should
turnover the total volume of water in your pool two to

2.3 General Requirements

1.
For best overall performance place the system as
close to the pool as possible.
slab so that the orientation of the valve outlets and
the pressure gauge are convenient and accessible
for the installation and operation of the unit.
exercised to ensure that the appliance is installed
in accordance with the Manufacturer's Instructions
and any standards that may exist.
5.
We recommend the use of barrel unions to connect
each component of the water conditioning system
Cartridge Pool Filters - CL and CV Series Filters
®
CL and CV Series
to ease in future servicing. Barrel unions are
WARNING
psi. Never subject the filter to operating pressure
can cause the lid to be blown off, which can result in
death, serious personal injury, or property damage.
6.
When performing hydrostatic pressure tests or
when testing for external leaks of the completed
subjected to does not exceed the maximum
working pressure of any of the components
within the system.
See Table 1 and Figure 1.
CL/CV
340
Filter Area (ft
2
)
Max. Flow (gpm)
127
Six Hour
Capacity (gal.)
Max. Working
Pressure (psi)
Normal Start Up
Pressure (psi)
Dimension "A"
"A"
OUTLET
18 ½ in
CL INLET
10 ½ in
Figure 1.
Dimensions, Jandy CL and CV Series
Cartridge Filters
Page 5
460
580
28 in
Port on
CV Model
CV INLET
Only
Port on
CL Model
Only

Advertisement

loading

  Related Manuals for Jandy Versa-Plumb CL Series