Recommended Plumbing Configuration; Tm System; Figure 3. Chlorine Generator Cell And Sensor Orientation With Flow Direction; Figure 4. Recommended Plumbing Configuration For Pool/Spa Combination Systems - Jandy APUREM Installation And Operation Manual

(
Jandy AquaPure /PureLink™ Power Center and Cell Kit
® ®
A A
UP
B
Figure 3. Chlorine Generator Cell and Sensor Orientation with Flow Direction

3.2.2 Recommended Plumbing Configuration

The preferred installation is that the cell and sensor are plumbed in the common line after (downstream)
the heater. The sensor is designed to be plumbed into the 3-port cell. Figure 4 illustrates the recommended
plumbing configuration, which results in the most reliable operation.
NOTE The AquaPure® and PureLink
relay. This ensures that the cell only operates when the pool pump is energized. The flow sensor serves as a
secondary means to ensure there is sufficient flow for the cell to operate.
Figure 4. Recommended Plumbing Configuration for Pool/Spa Combination Systems
)
|
Installation and Operation Manual
UP
Flow
Sensor
systems are powered from the LOAD SIDE of the pool circulation pump
TM
Heater
Flow
Sensor
UP
C
Control/Power
Cell
Sensor
JANDY
Pool
Return
Page 13 Page 13
ENGLISH ENGLISH
Sensor
Flow
Center
Spa
Bypass for
Spillover
Spa
Return