Brother 884-T11 Operation Manual page 197

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
7 After making the desired changes, touch
The pattern editing screen appears again.
● Once you have cut a repeated pattern into
separate elements, you cannot return to
the original repeated pattern.
● Each element can be edited separately in
the edit screen. Refer to "Selecting the
pattern to be edited" on page 182.
■ Assigning thread marks
By sewing thread marks, you can easily align
patterns when sewing a series. When sewing is
finished on a pattern, a thread mark in the shape
of an arrow will be sewn using the final thread.
When sewing a series of patterns, use the point
of this arrow for positioning the following
designs to be sewn.
● When repeatedly sewing individual
patterns, thread marks can be sewn
around the perimeter of the pattern only.
1 Touch
2 Touch
.
Note
Memo
.
.
3 Touch
be sewn.
1 Touch to cancel thread mark setting.
Memo
● When there are two or more elements, use
a pattern that you want to assign a thread
mark(s) to.
4 Touch
Note
● If the combined border pattern is rotated
in the embroidery settings screen, the
thread mark will be removed.
Editing the Embroidery Pattern (Pattern Editing Screen) 195
to select the thread mark to
and or and
.
1
to select
5