Embroidery Cards (Optional) - Brother 884-T11 Operation Manual

SELECTING/EDITING/SAVING PATTERNS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
3
1 Shows the amount of memory used by selected
pattern.
2 Shows the amount of free space in the
machine's memory.
3 Touch this key to delete the selected pattern
from the memory.
• If the wrong pattern was selected or you
wish to select a different pattern, touch the
key for the desired pattern.
■ Deleting embroidery data
From this screen, the embroidery data stored in
the machine's memory can be organized by
deleting unnecessary data.
After selecting the pattern that you wish to
delete, touch to display the screen
shown below.
1 Permanently deletes the data from the
machine's memory, then returns to the data
with no pattern selected.
2 Does not delete the data, then returns to the
screen before
3 Touch .
This confirms the pattern selection.
The pattern editing screen appears.
166
1
2
2
1
was touched.

Embroidery cards (optional)

■ About embroidery cards (optional)
• Use only embroidery cards manufactured
for this machine. Using unauthorized cards
may cause your machine to operate
incorrectly.
• Embroidery cards sold in foreign countries
cannot be used with this machine.
• Store embroidery cards in the hard case.
■ About embroidery card reader (optional) and
USB card writer module*
• Use only an embroidery card Reader
designed for this machine. Using an
unauthorized embroidery card Reader may
cause your machine to operate incorrectly.
Note
● Embroidery patterns cannot be saved from
the machine to an embroidery card
inserted into a connected USB card writer
module*.
* If you have purchased the PE-DESIGN Ver5 or
later, PE-DESIGN Lite or PED-BASIC, you can
plug the included USB card writer module
into the machine as an embroidery card
reader, and recall patterns.
■ Using embroidery card reader
When using the embroidery card reader,
carefully support the embroidery card reader
near the operation panel.
1 Plug the optional embroidery card reader/
USB card writer module* into the primary
(top) USB port on the machine.
1 Primary (top) USB port
2 Embroidery card reader/USB card writer
module*
* If you have purchased the PE-DESIGN Ver5 or
later, PE-DESIGN Lite or PED-BASIC, you can
plug the included USB card writer module into
the machine as an embroidery card reader, and
recall patterns.