Brother 884-T11 Operation Manual page 305

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
The built-in camera is being used
to align the embroidery position,
but the embroidery positioning
sticker is too near an edge or the
pattern extends from the
embroidery frame.
Change the position of the
embroidery positioning sticker, and
then try aligning the position again.
The USB media is write-protected.
Cancel the write protection.
You tried to save a copyright-
protected pattern to USB media or
a computer.
According to copyright laws,
patterns that are illegal to
reproduce or edit cannot be saved
to USB media or a computer. Save
the pattern in the machine's
memory.
The combined character pattern is
too large to fit in the extra-large
embroidery frame.
Change the character pattern
combination.
The USB media is write-protected.
Touch , and cancel the write
protection.
You tried to use an editing
function while the pattern is not
completely within the red outline.
Move the pattern so it is completely
within the outline.
The motor has locked up due to
tangled thread or for other reasons
related to thread delivery.
If the thread is entangled in the
bobbin case, clean the race, and
then oil it. (Refer to page 284 and
288.)
You tried to select a pattern after
the USB media in which the
pattern is saved has been changed.
An unusable embroidery card is
inserted.
Remove the embroidery card.
Troubleshooting 303
7