Western Digital Ultrastar Data60 Manual page 37

EcoDesign Disclosures
Figure 48: Right-Front Inside Corner, As Viewed from the Left-Rear-Top
Inside the drive bays of the right drive housing, use a T7 Torx screwdriver to remove the four (4)
Step 46 :
M3 6mm screws securing the drive housing to the baseboard:
Figure 49: Right Drive Bays, As Viewed from the Right-Front-Top
Step 47 : On the side of the chassis, use a T8 Torx screwdriver to remove the two (2) K30 10mm screws
securing the drive housing to the side of the chassis:
1. EU EcoDesign Disclosures
1.4 Ultrastar Data60 Disassembly
33