Western Digital Ultrastar Data60 Manual page 21

EcoDesign Disclosures
Figure 23: Safety Latch Release
d. Depress the latch release lever for the safety latches on the rail and push the chassis very
slightly forward. The chassis is now unsecured from the rack.
e. Ensure that you have the proper support mechanism to hold the chassis in position, whether
that be a team lifting partner or an appropriate lift.
f. Slide the chassis forward to free it from the rails. Place the chassis in a safe location to avoid
damage.
Removing the Chassis Rails
Uninstall the inner rails from the sides of the chassis.
Step 27 :
a. Unscrew the two Low-Profile M4 x 3.2mm Philips screws that attach the inner rails to the
chassis using a #2 Philips head screwdriver.
Warning: Do not lift the chassis by the Cable Tray while removing the chassis
from the rack OR while installing it into a rack. This can cause serious damage
to the unit or serious bodily harm to those handling the unit. Always team lift
the chassis by gripping the underside of the unit, and never try to lift a chassis
that is filled with drives.
1. EU EcoDesign Disclosures
1.4 Ultrastar Data60 Disassembly
17