Western Digital Ultrastar Data60 Manual page 16

EcoDesign Disclosures
Figure 13: Removing 3.5in HDD Assembly
Step 12 : Repeat these steps to remove all the drive assemblies from the enclosure.
Removing the IOMs
Step 13 : Uninstall the IOM(s).
a. Locate the latch release on the IOM and press it in the direction shown in the following
image.
Figure 14: Unlatching the IOM
b. Grasp both handles, one handle in each hand, and lift evenly with both hands to ensure the
IOM comes out straight. This will prevent any damage to the pins on the internal connectors.
1. EU EcoDesign Disclosures
1.4 Ultrastar Data60 Disassembly
12