Western Digital Ultrastar Data60 Manual page 19

EcoDesign Disclosures
Removing the IOM Fan
Step 21 : Remove the IOM Fan.
a. With one hand, grasp around the center square of the fan housing as shown in the following
image.
b. Pinch the IOM fan housing to release the latching mechanism and pull it straight out from the
chassis.
Figure 20: Removing IOM Fan
Releasing the Chassis Cover From the Rack
Step 22 : Release the safety latch on the inner rails on each side of the chassis as shown in the following
image.
Figure 21: Inner Rail Safety Latch Release
Step 23 : Push the chassis back into the rack.
1. EU EcoDesign Disclosures
1.4 Ultrastar Data60 Disassembly
15